Åben trailer med presenning

WEB-TRAILER ZPRASQ SYS 18 Tandem Durchlader

ZPRASQ SYS 18t 385/65 22.5 central axle chassis with through-loader body ----Curtainsider body Side height 2700 mm from loading area to lower edge of outer beam Axle loads: 18,000 kg (2 x 9,000 kg) Chassis length according to customer specification 6,000-8,000 mm (other lengths optional) Coupling height (middle) approx. 800 mm unloaded (other heights optional) Chassis width approx. 2,480 mm (outer frame-outer frame) Driving height: unloaded approx. 1,170 mm (top edge of floor) Support load approx. 1,000 kg COC papers 3 mm outer frame with groove for lashing eyes 7 pairs of lashing eyes (brackets) in the outer frame with groove screwed in
Cross member spacing IPE 80 approx. 600-650 mm (7.2t ground load)

1 set of support winches at the front, one-sided operation,
1 set of drop supports at the rear, height adjustable

Drawbar rigid (centre tube) with screwed-on towing eye
Towing eye ø 50 mm

Branded axles (SAF/BPW/JOST)
9t axle with 22.5" disc brake
without axle lift (option)

Axle spacing approx. 1310 mm
Air suspension unit 9 ton load capacity each with bellows diameter approx. 300mm
Total stroke approx. 180 mm
EBS braking system made by Knorr or Wabco
Dolhog Dkybecdw Isci
Air connections coupling head red and yellow
Lifting and lowering device with 1 rotary slide valve Knorr/Wabco
Tire pressure control

Branded tires 385/65 R 22.5

Construction certificate according to DIN EN 12642 XL

Contour marking on tarpaulins and rear porta
ECE signs on rear door below
Rear portals with 4 internal espagnolette locks, door leaves made of steel sandwich profiles
Sliding roof, automatic locking, can be opened from the rear (optionally from the front)
1 set of side sliding posts, made to our choice
Front doors with double joint and crossing plate with hinges on the
head frame
3 rows of wooden insert slats (optionally aluminum)
Sliding tarpaulin, tarpaulin material PVC12x12,880gr
Roof tarpaulin, reinforced version with 12x12 roof fabric
Tension ratchet at the rear and front

15-pin plug
Lighting system 24 volt LED
Flashing SML

Screen-printed floor 27mm laid transversely
Floor: Certificate for tested forklift axle load 7.2t according to DIN EN 283

Access ladder rear right, foldable and extendable, with platform
2 rubber bumpers at the rear corners
Anti-spray mud flaps
Plastic mudguards, 180 degrees
Side impact protection on both sides, aluminum or plastic profile

Chassis painted in RAL 9005 or Nova gray 7350, other colors at an additional cost (only if color is available in powder)

KTL with zinc phosphating plus powder, highest corrosion protection

Hot-dip galvanizing (optional)

COC papers

Price ex works

Attention!!!
Pictures show special equipment

Let us advise you and work out a free and non-binding offer. Leasing, financing or hire purchase possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.

Errors and prior sale reserved!!!

Annoncen blev oversat automatisk, og der kan forekomme nogle oversættelsesfejl.