Vejfejemaskine

Bucher - GMeiner - Giletta TGM 18250 Bucher

Operating hours: 1613, first registered: June 23, 2016, self-propelled_____Standard equipment: Fan unit - fan drive hydraulically via the transmission-independent PTO on the chassis (semi-hydrostatic drive) - Hydraulic fan drive - 50 l hydraulic oil tank - Engine compartment lined with sound-insulating material - Fan exhaust air duct upwards through the hopper front section - Hydraulic pump, single sweepings hopper - Sweepings hopper (with tailgate and sieve) and water tank made of 1.4003 chrome steel - Engine compartment paneling made of mild steel - Sweepings hopper gross volume 6.5 m³ - Sweepings hopper floor made of chrome-alloyed stainless steel, 1.4301 - Sweepings hopper tilt angle approx. 55 degrees - Dirt chute made of 1.4003 chrome steel - Inspection hatch right and left - Dirty water drain 4", A-coupling - Air duct sieve, manually foldable - 2 rotating beacons at the rear of the KGB - Air shut-off on the suction hose, pneumatically operated - Multi-stage safety support, pneumatically operated - Marker lights at the rear of the container, side marker lights - Integrated water tank - Preparation for rear suction hose boom or mounted on the roof - Side marker lightsSweeping material pickup - Sweeping material pickup, wear-resistant coated - Rough pickup by tilting the suction mouth - Suction hose diameter 250 mm - Pushed disc brush - Hydraulically driven steel disc brush - Pulled steel disc brush, diameter 500 mm - Continuously variable speed control for disc brush - Two robust pivoting trailing wheels - Automatic lifting of the sweeping units when reversing - Work lights for sweeping unit Roller brush - Pulled roller brush suspension - Brush length 1,300 mm, brush diameter 406 mm with plastic trim (depending on the chassis) - Hydraulically driven roller brush - Throw limiter apron for Roller brush unit water system - Water tank capacity approx. 1,554 l - Water tank made of chrome steel, 1.4003 with coating - Water level indicator in the driver's cab - Water filling device, Storz C (2"), right - Manual water filling device, right and left - Water pump, hydraulically driven - Automatic water stop when the sweeping units are raised - Spray water connection, 3/4", rear right - Water blow-out system - Electric water valves in the driver's cab - 2-nozzle low-pressure front instrument panel and control panel - Bucher instrument panel, including 7" color display - Ergonomic control unit, mounted on the driver's door, equipped with the main functions - Display includes the following functions: water level indicator, operating hours, and rear axle load - Warning and indicator lights for rear axle load - Control and monitoring unit for regulating the brush contact pressure (broom relief), stepless speed control of the disc brushes - Electric valves for the water system, operated in the driver's cab. - Operation The dirt container functions can be controlled via a cable remote control from the driver's cab, but also from outside. - Operation of the air guide sieve, operation at the rear right of the vehicle - Overload indicator for rear axle load, warning lamp in the display (option
Nelsfy Am Uehcdwwjcr

Annoncen blev oversat automatisk, og der kan forekomme nogle oversættelsesfejl.