7,82 m Jumbo veksellad

Krone 7,82 Jumbo Wechselbrücke, gebraucht

7,82 m BDF Krone smooth side swap body, used (multiple units available)
RAL: 6005 Moss Green

Support height: 1120 mm
The swap body is watertight and the roller shutter door operates smoothly.

External dimensions (approx. in mm):
Length 7,820 | Width 2,550 | Height 2,925
Internal dimensions (approx. in mm):
Length 7,700 | Width 2,480 | Height 2,700

Door openings (mm):
Width 2,370 | Height 2,600
Lashing: Keyhole type

Maximum permissible gross weight for approval/operation: 16,000 kg
Suitable for combined transport (rail compatible), including rail coding according to DIN EN 13044
Rail approval Code XL (for rail transport above 120 km/h)

Floor frame:
195 mm high floor assembly incl. flooring; rectangular longitudinal tubes with crossmembers and outer frame as welded construction with underfloor guide tunnel
4 container corner fittings on 20' basis, symmetrical overhangs
4 grapple bar strips
7 pairs of lashing rings in the side rubbing rail

Floor:
Type: BO WST
27 mm strong water-resistant bonded screen printing ply (phenolic resin), with strength according to DIN EN 283; suitable for floor loads up to max. 5,460 kg forklift axle load
2 ventilation openings at the front of the floor (as per GGVS)

Box body:
Type AB WST
Internal height: 2,700 mm | Portal height inside: 2,525 mm | Total height: 2,925 mm | Corner height: 2,900 mm
Enclosed body

Side walls: smooth, made of galvanized steel sheet cassettes
Roof: trapezoidal-profile galvanized steel sheet, height: 25 mm
2 air vents per side wall
Gsdpfx Aey Am Efoc Esbk
Side rubbing rail and side wall with recesses, internal three-sided approx. 300 mm high reinforced anti-collision protection for forklift access
Front wall: smooth, galvanized steel sheet cassettes. Inside 21 mm screen-printed board up to 750 mm high, above that continuous 12 mm screen-printed board. Front wall exterior with offset (optimized for curve running).

Rear wall: roller shutter door (inside width 2,370 mm), with DB Train Plus approval, rollers replaceable
Flat steel guard for roller door guide rail
Side walls inside fully fitted with keyhole panels
13 flush-mounted steel guide rails on left and right sides for double-deck loading beams
13 LM loading beams for double-deck loading
Horizontal steel anti-collision protection on rear profile, left and right.

Annoncen er blevet oversat automatisk. Oversættelsesfejl kan forekomme.