TræbearbejdningEschlböck Biber
BIBER 3-21 ZAPFWELLE
Træbearbejdning
Eschlböck Biber
BIBER 3-21 ZAPFWELLE
fast pris uden moms
18.900 €
(22.491 € brutto)
Betingelse
Brugt
Beliggenhed
Calbe-Saale 

Vis billeder
Vis kort
Grunddata
Pris og placering
fast pris uden moms
18.900 €
(22.491 € brutto)
- Sælgers placering:
- Gewerbering West 12, 39240 Calbe-Saale, Tyskland
Ring
Detaljer om tilbuddet
- Noterings-id:
- A202-60-165
- Referencenr.:
- 300126588
- Sidst opdateret:
- d. 11.10.2025
Beskrivelse
BIBER 3-21 PTO
Eschlböck Biber 3-21 PTO
Weight approx. 1,080 kg
Standard equipment:
- Wood diameter up to 21 cm
- Feed width 24 cm
- Disc wheel chipper with
chipper disc diameter: 93 cm
- 3 chipping knives, 28 mm, re-sharpenable
- Counterknife + 2 side counterknives (wear and angle protection), usable on both sides
- Grinding wheel mounted on the machine
- Independent hydraulic circuit
- Hydraulic tank 35 liters
- 2 hydraulically driven, hardened feed rollers
- 2 oil motors and parallel bearing
- Hydraulic oil level and temperature indicator
- Chipping length adjustment
- Chipping length from 1 to 3 cm,
can be set electro-hydraulically
- 2 x 3 interchangeable stop plates in
the disc wheel and re-shredding comb
for precise wood chips
- Smart Control
- Operator-guided control with visualization of feed speed, adjustable chipping length and overload protection, including operating hours counter (daily and total hours)
- Mode selection for desired chip quality
- Safety equipment for manual feeding
- 2 control bars and one stop bar,
release buttons and emergency stop switches on both sides
- Discharge chute infinitely rotatable by 270 degrees, with adjustable discharge flap, operable from ground level
- Discharge height from ground: 3,250 mm
Drive system
- PTO-driven (30 to max. 80 kW)
- PTO speeds: 540, 750, 1000 rpm
- Drive shaft with overload and freewheel clutch
- 3-point linkage
- Paintwork:
RAL 3020 traffic red
RAL 7015 slate grey
- Lighting for 3-point linkage B3
Gusdpoxmlmgefx Afwoh
Annoncen blev oversat automatisk, og der kan forekomme nogle oversættelsesfejl.
Eschlböck Biber 3-21 PTO
Weight approx. 1,080 kg
Standard equipment:
- Wood diameter up to 21 cm
- Feed width 24 cm
- Disc wheel chipper with
chipper disc diameter: 93 cm
- 3 chipping knives, 28 mm, re-sharpenable
- Counterknife + 2 side counterknives (wear and angle protection), usable on both sides
- Grinding wheel mounted on the machine
- Independent hydraulic circuit
- Hydraulic tank 35 liters
- 2 hydraulically driven, hardened feed rollers
- 2 oil motors and parallel bearing
- Hydraulic oil level and temperature indicator
- Chipping length adjustment
- Chipping length from 1 to 3 cm,
can be set electro-hydraulically
- 2 x 3 interchangeable stop plates in
the disc wheel and re-shredding comb
for precise wood chips
- Smart Control
- Operator-guided control with visualization of feed speed, adjustable chipping length and overload protection, including operating hours counter (daily and total hours)
- Mode selection for desired chip quality
- Safety equipment for manual feeding
- 2 control bars and one stop bar,
release buttons and emergency stop switches on both sides
- Discharge chute infinitely rotatable by 270 degrees, with adjustable discharge flap, operable from ground level
- Discharge height from ground: 3,250 mm
Drive system
- PTO-driven (30 to max. 80 kW)
- PTO speeds: 540, 750, 1000 rpm
- Drive shaft with overload and freewheel clutch
- 3-point linkage
- Paintwork:
RAL 3020 traffic red
RAL 7015 slate grey
- Lighting for 3-point linkage B3
Gusdpoxmlmgefx Afwoh
Annoncen blev oversat automatisk, og der kan forekomme nogle oversættelsesfejl.
Udbyder
Bemærk: Registrer dig gratis eller log ind, for at få adgang til alle oplysninger.
Registreret siden: 2017
Send anmodning
Telefon & Fax
+49 33748... annoncer
Du kan også være interesseret i disse annoncer.
lille annonce

598 km
Træbearbejdning
Eschlböck BiberBIBER 3-21 ZAPFWELLE
Eschlböck BiberBIBER 3-21 ZAPFWELLE
Din annonce er blevet slettet
Der opstod en fejl